If you need to connect more than one SQM-LE to the local Ethernet port on a Windows computer:
- Connect an Ethernet hub to the local Ethernet port on the computer.
- Connect the SQM-LE devices to the hub.
- Use the Lantronix Device Installer (LDI) to enable the local port (Tools-> Options -> Local Area Connection). Press Search to see if devices show up.
- Record the IP addresses that were identified.
- Start up the Unihedron Device Manager (UDM) and enter one of the IP addresses into the Ethernet tab.
- Press the Version or reading button to make the connection.
- Repeat the last two steps for the second SQM-LE.
Note:
- The SQM-LE devices can have the IP address fixed with the LDI.
- UDM can be started from the command line with the IP address defined.
