Author Topic: Windows local hub for multi Ethernet (LE) devices  (Read 30 times)

admin

  • Anthony Tekatch
  • Administrator
  • Jr. Member
  • *****
  • Posts: 70
    • Unihedron
Windows local hub for multi Ethernet (LE) devices
« on: October 05, 2017, 11:30:37 pm »
If you need to connect more than one SQM-LE to the local Ethernet port on a Windows computer:
  • Connect an Ethernet hub to the local Ethernet port on the computer.
  • Connect the SQM-LE devices to the hub.
  • Use the Lantronix Device Installer (LDI) to enable the local port (Tools-> Options -> Local Area Connection). Press Search to see if devices show up.
  • Record the IP addresses that were identified.
  • Start up the Unihedron Device Manager (UDM) and enter one of the IP addresses into the Ethernet tab.
  • Press the Version or reading button to make the connection.
  • Repeat the last two steps for the second SQM-LE.

Note:
  • The SQM-LE devices can have the IP address fixed with the LDI.
  • UDM can be started from the command line with the IP address defined.