Home   Forum | Catalog | View cart | Contact 

Sky Quality Meter  - Tripod adaptors

SQM tripod adaptor option


Example

This adaptor kit was designed specifically for the SQM (non-lens/original) so that the battery compartment is accessible with the adaptor in place.

The adaptor screws into the back of the SQM and allows the meter to be mounted on a tripod with a 1/4-20 thread.

The kit includes one tripod adaptor, 3D-printed plastic, and two longer screws (to replace two short screws already in the meter).

3D part view


SQM-TA Kit
$15USD


SQM-L tripod adaptor option


Example

This adaptor kit was designed specifically for the SQM-L so that the battery compartment is accessible with the adaptor in place.

The adaptor screws into the back of the SQM-L and allows the meter to be mounted on a tripod with a 1/4-20 thread.

The kit includes one tripod adaptor, 3D-printed plastic, and two longer screws (to replace two short screws already in the meter).

3D part view


SQM-L-TA Kit
$15USD


SQM-LE/LU tripod adaptor option


Example

This adaptor kit was designed specifically for the SQM-LE/LU meters and includes a wire guide to hold the cables in place.

The adaptor screws into the back of the SQM-LE or LU and allows the meter to be mounted on a tripod with a 1/4-20 thread.

The kit includes one tripod adaptor, 3D-printed plastic, and two longer screws (to replace two short screws already in the meter).

3D part view


SQM-LELU-TA Kit
$15USD


SQM-LU-DL tripod adaptor option


Example

This adaptor kit was designed specifically for the SQM-LU-DL meter which is longer than our other meters.

The adaptor screws into the back of the SQM-LU-DL and allows the meter to be mounted on a tripod with a 1/4-20 thread.

The kit includes one tripod adaptor, 3D-printed plastic, and two longer screws (to replace two short screws already in the meter) 3D part view.

Note: The built in compass on the SQM-LU-DL-V (Vector meter) is very sensitive to hard and soft iron. You may notice variations in the Azimuth (compass reading) while mounted to a metal tripod. Also, brass screws (that come with the SQM-LU-DL-V-battery holder) must be used to secure the adaptor to the SQM-LU-DL-V.


SQM-DL-TA Kit
$15USD