[SQM] Changing baud rate
anthony at unihedron.com
Tue Nov 30 15:46:21 UTC 2010
No, the baud rate in the "connected" SQM models is independent of the
readings inside the unit.
The SQM-LE/LU/LR all take at least one second to collect data for a
reading. In darker conditions, it could take more than one second
(usually 10 seconds max. with a 300 second limit). Gathering readings too
rapidly will result in the same reading being supplied.
On Tue, 30 Nov 2010 11:27:19 -0400, Sean Dzafovic <sdzafovic at gmail.com> wrote:
> Does changing the baud rate of the SQM have any effect on the data gathered?
> Sean Dzafovic
More information about the sqm