Unihedron

General Category => SQM-LU => Topic started by: galaxy45 on January 25, 2024, 11:47:08 am

Title: creating a task in windows 10
Post by: galaxy45 on January 25, 2024, 11:47:08 am

Hello,

I'm interested in "creating a task" using task scheduler in windows 10 to "open" and "start" the SQM-LU reader  everyday at 6:30pm

thank you

Title: Re: creating a task in windows 10
Post by: admin on January 25, 2024, 01:37:22 pm

Quote from: galaxy45 on January 25, 2024, 11:47:08 am

I'm interested in "creating a task" using task scheduler in windows 10 to "open" and "start" the SQM-LU reader  everyday at 6:30pm

There are some instructions here:

http://unihedron.com/forum/index.php?topic=64.msg113#msg113 (http://unihedron.com/forum/index.php?topic=64.msg113#msg113)

Let me know if you need more help.

Title: Re: creating a task in windows 10
Post by: galaxy45 on January 29, 2024, 01:50:03 am

Thanks,

Yes, I need some help. Task start but wont start reading. -SEM  doesnt trigger start reading. Settings intervals in seconds neither.  I have the SQM-LU

Title: Re: creating a task in windows 10
Post by: admin on January 29, 2024, 11:24:16 am

For USB meter, use -SUC

-SUC,x   ;Select USB device where x = communication portname i.e. COM1

Other commands are described in UDM->Help->Command_Line_Information.

Try:
 -LCM,1
to read every 1 minute on the minute

If that does not work, then copy your entire command to a message reply here.

Title: Re: creating a task in windows 10
Post by: galaxy45 on February 05, 2024, 10:28:10 am

The two commands work for me.

Thank you

Title: Re: creating a task in windows 10
Post by: galaxy45 on February 13, 2024, 12:13:41 am

At the beginning seems to work, I wasnt sure enough. This is my written command.

Title: Re: creating a task in windows 10
Post by: admin on February 13, 2024, 01:02:23 am

Quote from: galaxy45 on February 13, 2024, 12:13:41 am

At the beginning seems to work, I wasnt sure enough. This is my written command.

Are you intending to use UDM (Unihedron Device Manager) or SQM Reader (by Knightware)?

Title: Re: creating a task in windows 10
Post by: galaxy45 on February 14, 2024, 12:59:57 am

SQM reader.

Title: Re: creating a task in windows 10
Post by: admin on February 14, 2024, 11:12:29 am

Quote from: galaxy45 on February 14, 2024, 12:59:57 am

SQM reader.

Sorry, I misunderstood. That is not our program. SQM-Reader is written by Knightware.

You can get help/support for that program here: http://www.knightware.biz/index.htm