Unihedron

General Category => Connected meters (SQM-LE/LU/LR/DL) => Topic started by: martin_zkp1 on February 17, 2017, 12:45:52 pm

Title: SQM-LE works with SQM Reader(s) but not UDM
Post by: martin_zkp1 on February 17, 2017, 12:45:52 pm

Works with both Reader 2.0 and Reader Pro 2. But UDM. Any ideas?

Title: Re: SQM-LE works with SQM Reader(s) but not UDM
Post by: admin on February 17, 2017, 02:03:48 pm

Quote from: martin_zkp1 on February 17, 2017, 12:45:52 pm

Works with both Reader 2.0 and Reader Pro 2. But UDM. Any ideas?

Does UDM recognize the SQM-LE in the find window? Does UDM show the MAC number and IP address?

Is it possible that you are running UDM at the same time as the SQM-Reader software? Only one software can be run at the same time.

If possible, please provide the details of what UDM shows when it "does not work with your SQM-LE".

Title: Re: SQM-LE works with SQM Reader(s) but not UDM
Post by: martin_zkp1 on February 18, 2017, 01:47:34 pm

Think I solved it, sort of.... For some reason when I reconnect the SQM and I ask to search its IP it is different than last time and I need to copy and paste it in. Then it works. I save the config and now it seems to recognize it.

There is another issue in an new post.

Title: Re: SQM-LE works with SQM Reader(s) but not UDM
Post by: admin on February 18, 2017, 01:53:39 pm

Many routers have the ability to fix the IP address of devices by recognizing the MAC number. This way you can leave the SQM-LE Ethernet settings at DHCP and your router will assign the same IP address each time it sees the SQM-LE at power up.