Unihedron

General Category => Connected meters (SQM-LE/LU/LR/DL) => Topic started by: admin on October 05, 2017, 11:30:37 pm

Title: Windows local hub for multi Ethernet (LE) devices
Post by: admin on October 05, 2017, 11:30:37 pm

If you need to connect more than one SQM-LE to the local Ethernet port on a Windows computer:

• Connect an Ethernet hub to the local Ethernet port on the computer.
• Connect the SQM-LE devices to the hub.
• Use the Lantronix Device Installer (LDI) to enable the local port (Tools-> Options -> Local Area Connection). Press Search to see if devices show up.
• Record the IP addresses that were identified.
• Start up the Unihedron Device Manager (UDM) and enter one of the IP addresses into the Ethernet tab.
• Press the Version or reading button to make the connection.
• Repeat the last two steps for the second SQM-LE.

Note:

• The SQM-LE devices can have the IP address fixed with the LDI.
• UDM can be started from the command line with the IP address defined.