Unihedron
General Category => SQM-LU => Topic started by: galaxy45 on January 25, 2024, 11:47:08 am
-
Hello,
I'm interested in "creating a task" using task scheduler in windows 10 to "open" and "start" the SQM-LU reader everyday at 6:30pm
thank you
-
I'm interested in "creating a task" using task scheduler in windows 10 to "open" and "start" the SQM-LU reader everyday at 6:30pm
There are some instructions here:
http://unihedron.com/forum/index.php?topic=64.msg113#msg113 (http://unihedron.com/forum/index.php?topic=64.msg113#msg113)
Let me know if you need more help.
-
Thanks,
Yes, I need some help. Task start but wont start reading. -SEM doesnt trigger start reading. Settings intervals in seconds neither. I have the SQM-LU
-
For USB meter, use -SUC
-SUC,x ;Select USB device where x = communication portname i.e. COM1
Other commands are described in UDM->Help->Command_Line_Information.
Try:
-LCM,1
to read every 1 minute on the minute
If that does not work, then copy your entire command to a message reply here.
-
The two commands work for me.
Thank you
-
At the beginning seems to work, I wasnt sure enough. This is my written command.
-
At the beginning seems to work, I wasnt sure enough. This is my written command.
Are you intending to use UDM (Unihedron Device Manager) or SQM Reader (by Knightware)?
-
SQM reader.
-
SQM reader.
Sorry, I misunderstood. That is not our program. SQM-Reader is written by Knightware.
You can get help/support for that program here: http://www.knightware.biz/index.htm